Grand Rental Station of Vinton

The Emglo Air-Mate air compressor is lightweight and easy to carry almost anywhere. Designed especially for the contractor and rental trades, the unique profile practically eliminates tip-over and resultant damage. While other small portables operate at 100 psi, the Air-Mate is designed to yield 125 psi, and it comes with an air-line regulator as standard equipment. Delivers 3.6 cfm at 125 psi.

The Mi-T-M 115 CFM 93" Waterlift 9.0 Gallon Water Recovery Electric Wet/Dry Vacuum quietly and conveniently vacuums up water with ease. The vacuum comes with accessories designed to make any wet/dry vacuum job simple and easy. The Mi-T-M Water Recovery Electric Wet/Dry Vacuum is up to 7 decibels quieter than the standard wet/dry vacuum.

Flooring materials are protected by the roller's smooth surface and rounded corners; Yoke and handle are painted to prevent rusting

The tilt action for the SL-8 allows for more controlled and even sanding when compare to other machines available to the rental trade. When you sand forward and backward with the SL-8, you can be assured of straight sanding because it runs on the drum and wheels. The weight of the machine is specifically designed and evenly distributed for the best results

The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working.

The 17" floor machines are field-tested to withstand the demanding heavy duty use required for stripping, scrubbing and polishing hard surface flooring. Ideal for use in small and confined areas on hard surface flooring. We stock pads, sandpaper and screens for all types of floor refinishings.

The totally redesigned BULLDOG Xtreme outlasts the competition in both speed and performance. Multi-function selector has 3 modes of operation: rotary hammer, hammer-only and rotation-only mode. Vario-Lock Positioning rotates and locks chisel into 36 different positions to optimize working angle. The patented rotating brush plate provides equal power in forward and reverse. Cord turret has a 35-degree pivot for added flexibility and longer cord life. SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Variable-speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. A comfortable D-handle grip design for greater control, especially when drilling overhead or downward.

The Ditch Witch 1330 is a compact walk-behind that is clearly in front of the 13-horsepower trencher field. Built for low maintenance and high reliability, the 1330 features an innovative hydraulic oil cooling system that keeps the trencher humming even on the hottest days. Easy-to-understand, easily accessible, color-coded controls help new operators quickly become proficient. Compact enough to fit through a standard yard gate.

BX-3 Brick saw. This uniquely designed masonry saw was developed to target the masonry contractor's needs for portability, durability and reliability. Lightweight and versatile the MK-BX-3 Brick Xtreme weighs in at 25lbs and features a high torque motor capable of cutting a variety of masonry material. With dry cutting becoming the standard in masonry projects, the new Brick Xtreme addresses the need for enhanced cutting efficiency and performance on the job site.

MK Diamond Products MK-100 is a professional grade, wet cutting tile saw with a fully enclosed, fan-cooled, high torque 1-1/2 horsepower motor. The MK-100 rips 20-inch tile, diagonally cuts 14-inch tile, has a 3-3/4 inch depth of cut and a 10 inch blade capacity. Manufactured with a heavy duty, zinc-plated, one-piece steel frame assembly, cast-aluminum support components, and many other unique features, the MK-100 provides unrivaled quality, performance, and value. The MK-100 comes complete with a 10-inch MK-100 diamond blade, fully submersible electric water pump and adjustable rip guide.

The K760 is the right choice for contractors. Not only because of the powerful engine and low emissions but also because of the K760’s impressive power-to-weight ratio and low vibrations that reduce operator fatigue and enable longer cutting time. Its wide range of features and benefits guarantee it will perform consistently – everywhere, every time

The Bosch 11248EVS is a rotary hammer drill using a spline drive for the drill bits. The capacity of this drill is 1-9/16" solid and 4" for the core drills. Has power to drill through any concrete wall or for setting something into your concrete floor.

The Bosch 11316EVS SDS-Max demolition hammer features a powerful 14 amp motor with a hammer mechanism, which hits 10 percent harder, for taking out blocks or tile. The unit's electronic feedback circuitry maintains maximum performance levels at all times, while its electro-pneumatic impact system maximizes impact force and minimizes vibration. The hammer's improved tool holder has advanced heat treatment and dust-seal protection for long life. Its slide on/off switch and push-to-strike design reduces user fatigue. The 12-position Vario-Lock helps optimize different working angles. Includes 360-degree side handle

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. And with the ability to drive up to 100 nails per minute, the RN46-1 offers two firing methods: contact trip and sequential trip. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. Sequential trip firing is for precision applications, such as finish work. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Quite simply one of the best framing models available, Bostitch's high-powered stick nailer is basically the sleek sports car of framing stick nailers. The nailer's aggressive teeth easily grip lumber for toe-nailing. You just push a button for depth control. There's also a 360-degree exhaust deflector, so you can point the discharge away from the face. The nailer packs plenty of power (1,000 inch-pounds) and drives 3-1/2-inch nails into the toughest lumber without breaking a sweat. This model shoots 2- to 3-1/2-inch, 28-degree, wire-weld-collated, clipped-head nails, and holds up to 75.

The original Model 138-2 is the industry’s leading drywall lifter.  Why struggle with wallboard when you can single handedly lift wallboard up to 11 foot walls and ceilings.  Cradle tilts laterally 65 degrees for easy loading and for installation on walls and sloped ceilings.  It also tilts longitudinally 10 degrees.  Fast action, single stage winch  with silent cam=lock brake easily lifts and lowers wallboard so you don’t have to strain your back.